Atmosphere’s all new galvanized steel back draft dampers fit directly into the duct simplifying installation. They feature a shaft for each of the 2 flaps so to prevent jamming. Also, the flaps close onto a perimeter gasket ensuring the best air seal and quiet operation.
The Flanges and end-caps are made from galvanized steel and are designed to be press-fitted into the PROfilters, no tools are required to install the Flange and end-cap to the filter. They are sold and packaged together.
Fits all Pro reversible filters
Atmosphere’s all new galvanized steel back draft dampers fit directly into the duct simplifying installation. They feature a shaft for each of the 2 flaps so to prevent jamming. Also, the flaps close onto a perimeter gasket ensuring the best air seal and quiet operation.
The Flanges and end-caps are made from galvanized steel and are designed to be press-fitted into the PROfilters, no tools are required to install the Flange and end-cap to the filter. They are sold and packaged together.
Fits all Pro reversible filters
Atmosphere’s all new galvanized steel back draft dampers fit directly into the duct simplifying installation. They feature a shaft for each of the 2 flaps so to prevent jamming. Also, the flaps close onto a perimeter gasket ensuring the best air seal and quiet operation.
Atmosphere’s all new galvanized steel back draft dampers fit directly into the duct simplifying installation. They feature a shaft for each of the 2 flaps so to prevent jamming. Also, the flaps close onto a perimeter gasket ensuring the best air seal and quiet operation.
The Flanges and end-caps are made from galvanized steel and are designed to be press-fitted into the PROfilters, no tools are required to install the Flange and end-cap to the filter. They are sold and packaged together.
Fits all Pro reversible filters
Atmosphere’s all new galvanized steel back draft dampers fit directly into the duct simplifying installation. They feature a shaft for each of the 2 flaps so to prevent jamming. Also, the flaps close onto a perimeter gasket ensuring the best air seal and quiet operation.
The Flanges and end-caps are made from galvanized steel and are designed to be press-fitted into the PROfilters, no tools are required to install the Flange and end-cap to the filter. They are sold and packaged together.
Fits all Pro reversible filters
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with the Pro 100 filter.
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with the Pro 125 filter.
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with the Pro 150 filter.
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with the Pro 45S filter.
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with Pro 50 filter.
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with Pro 70S filter.
The Pre filters are used to stop small particles and dust from getting in contact with the carbon, thus preventing the premature usage of the carbon. The Pre filters are made from 100% polyester. They are sold packaged in a plastic bag to ensure they stay clean until installation.
Use with the Pro 75 Filter.
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 900
- Flange: 6" or 8"
- Outside Diameter: 15"
- Height: 40"
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 1140
- Flange: 8" or 10"
- Outside Diameter: 15"
- Height: 49"
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 1300
- Flange: 10" or 12"
- Outside Diameter: 15"
- Height: 59"
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 150
- Flange: 4" Fixed
- Height: 18"
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 450
- Flange: 4" or 6"
- Outside Diameter: 15"
- Height: 20"
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 400
- Flange: 6" Fixed
- Outside Diameter: 7"
- Height: 18"
Most air filters utilize 65% of the carbon available by only filtering through the top section of the carbon filter, leaving the bottom section unused. PROfilter uses an innovative patented design allowing the user to reverse the filter, benefitting from the use of 100% of the carbon available and effectively extending the units’ life span. Manufactured with only the finest TC940 virgin 4mm grain sized carbon, PROfilter effectively removes 99.5% of odors. Rated for a continuous worry-free operation and available in seven different sizes and CFM ratings, PROfilter can be used for commercial or residential applications.
- CFM: 640
- Flange: 6"or 8"
- Outside Diameter: 15"
- Height: 30"
Vortex Powerfans are high performance inline duct blowers constructed from quality steel with heavy duty attractive hammertone powdered coat finish. The extended collar allows for easy duct installation and taping. Superior quality and smart design ensure vibration-free operation with balanced motorized impellers with permanently lubricated ball bearings. Include 6' power cords, and galvanized mounting brackets allowing both horizontal and vertical installation.
Atmosphere's V-Series combines high performance and quiet operation. These fans are equipped with a mixed-flow impeller allowing more air volume than any other comparable impeller design. Furthermore, the V-Series fans operate at lower RPM (1500 to 1700) making them even quieter. These fans are available in 14" diameter; other sizes will be available shortly.
Other features include:
- Impact resistant, sound absorbing heavy gage steel casing
- A rustproof hammertone powder coat epoxy finish
- The permanently lubricated balanced motor ensures long life
- 100% speed controllable Factory installed 120V power cord
- A worry free 10 Year WARRANTY
- Aerodynamic design allowing more air flow
- Heavy gauge steel casing with a hammertone powder coat finish, making it more sound absorbing and rustproof
- High quality maintenance-free balanced motor, equipped with a mixed flow impeller, allowing an extremely quiet operation
- 100% speed controllable, easing air flow adjustment, allowing better balancing of the ventilation system
- Extended collar and lip, allowing easy duct hook-up
