120 volt 15 amp Digital Timer (Case-8)
For gardeners that have exact timing requirements, we carry the Intermatic Digital Timer. It will time up to 28 on/off settings per day; accurate to the minute. The timer has a digital clock and LCD readout. Auto adjusts to sunrise/sunset time for dusk/dawn setting. Has 2 timed receptacles and a convenient on/off indicator light. It is rated for 15 amps at 125 volts. Not for use with H.I.D. Lights.
24 Hr Analog Timer 120v (Case-12)
The ValuLine 24 hour Analog Timer from C.A.P. has a minimum of 15 minutes on and a maximum of 24 hours off. Has 2 timed receptacles and a convenient on/off indicator light. The unit is grounded and rated for 15 amps at 120 volts. Good for lighting, air conditioning or other high amperage devices.
C.A.P. 15 Minute On-Delay
The HLC-2e is designed to protect your expensive HID lights from “Hot Starts” A hot start occurs whenever your lights are turned OFF and then back ON before the lamp is allowed to cool off. Hot starts caused by power outages reduce your lamp’s life and intensity. When the HLC-2e is connected to your lights, it will sense a power interruption and start a 15 minute time delay to keep the lights from trying to re-fire during the cool down period. The HLC-2e can also be used to delay other devices from starting for 15 minutes when power is applied. The HLC-2e is rated for 15 amps @ 120 volts. 3 year no hassle warranty.
C.A.P. Cycle Timer, 1 minute on/4 minutes off
The NFT series of preset recycling timers from C.A.P. are the simplest devices available for turning a device ON and OFF at precise intervals. The NFT-1e Timer is pre-set to turn ON for 1 minute and OFF for 4 minutes. The NFT-2e Timer is preset at 3 minutes ON and 5 minutes OFF. Plug the NFT into any standard outlet. Plug whatever you want to control into the receptacle on the front face and you’re done. NFT timers are rated for 15 amps @ 120 volts. 3 year no hassle warranty.
C.A.P. Cycle Timer, 3minute on/5 minutes off
The NFT series of preset recycling timers from C.A.P. are the simplest devices available for turning a device ON and OFF at precise intervals. The NFT-1e Timer is pre-set to turn ON for 1 minute and OFF for 4 minutes. The NFT-2e Timer is preset at 3 minutes ON and 5 minutes OFF. Plug the NFT into any standard outlet. Plug whatever you want to control into the receptacle on the front face and you’re done. NFT timers are rated for 15 amps @ 120 volts. 3 year no hassle warranty.
C.A.P. High Temp Shutdown
The HLC-1e is used as a high temperature shutdown by plugging your lights into the outlet and setting the maximum temperature that your growing environment can sustain. If this setting is exceeded, your lights will turn off. This is cheap insurance for your garden. Comes with a 12’ remote temperature sensor. The HLC-1e is rated at 15 amps @ 120 volts.3 year no hassle warranty.
C.A.P. High Temp Shutdown & On-Delay
The HLC-3e HID lighting controller combines the functions of the HLC-1e and HLC-2e to protect your expensive HID lights from hot starts and your garden from high temperatures. A high temperature shutdown provides insurance from crop damage due to high heat from ventilation and cooling problems. When connected to your lights, it will monitor your growing area’s temperature and disable your lights if the maximum temperature you specify is exceeded. The HLC-3e will also sense a power interruption and start a 15 minute time delay to keep your lights from trying to re-fire during the cool down period. Comes with a 12’ remote temperature sensor. The HLC-3e is rated at 15 amps @ 120 volts. 3 year no hassle warranty.
Cooling Thermostat
The TMP-1 allows you to control the temperature within your growing environment. Just connect your equipment, then set the temperature that you wish to maintain. If the temperature varies from your setting, the outlet on the front is activated. Comes with a 3’ remote sensor. The TMP-1 is rated for 15 amps @ 120 volts. 3 year warranty.
Cooling/Heating Thermostat
The TMP-DNe allows you to control the temperature within your growing environment. You can set the day and night temperatures independently. The TMP-DNe can be set to either heat or cool. Just connect your equipment, then set the temperature that you wish to maintain. If the temperature varies from your setting, the outlet on the front is activated. The temperature differential can be set at 3, 5 or 7 degrees. Comes with a 12’ remote sensor. The TMP-DNe is rated for 15 amps @ 120 volts. 3 year warranty
Day ON” Timer
The PTC series of photo controllers from C.A.P. are perfect when you need to turn something ON only during daylight hours or only at night. A photocell senses whether it is day or night, and turns the device plugged into it ON or OFF depending on which model you are using. The PTC-1 turns ON whatever is plugged into it during the “day” when the lights are on. The PTC-2 turns ON the device during the “night”, when the lights are off. PTC(s) are rated for 15 amps @ 120 volts. 3 year no hassle warranty.
