100’ 3 Outlet Power Block
Our Power Cords feature a 3 outlet plug block, saving the cost and clutter of running two or three cords for gardening appliances. The cords are rated for up to 15 amps for the 25’ and 50’ cords and 13 amps for the 100’ cord.
10’ 14 Gauge Extension
Our extension lamp cords enable the user to increase the distance from their ballast to their reflector. They are available in 10’ and 50’ lengths. Please note that 50’ lamp cord extensions can only be used with the NextGen Electronic Ballasts.
25’ 3 Outlet Power Block
Our Power Cords feature a 3 outlet plug block, saving the cost and clutter of running two or three cords for gardening appliances. The cords are rated for up to 15 amps for the 25’ and 50’ cords and 13 amps for the 100’ cord.
3 Outlet Power Block
Need to split an outlet into 3? This inexpensive Power Adapter will convert one outlet into 3 grounded outlets. Made of solid molded plastic, it will last for years! Will handle up to 15 amps.
3 Outlet Power Block
Need to split an outlet into three? This Super Heavy Duty 2’ Power Block features super flexible, extra durable wire. Will stand up to heat, cold, and rough use. The plugs light up to confirm that power is available. Will handle up to 20 amps.
30 amp Relay
The HPR-1 is a hard-wired 30amp capacity, 240 volt version of the UPM-1. The HPR-1 is perfect for controlling higher loads such as large air conditioners or multiple HID ballasts. You supply
240 volt power to the input side of the HPR-1. The air conditioner or ballasts to be controlled are then hard-wired into the output side of the relay. The 16 foot trigger cable coming from the HPR-1 is then connected to your control device such as a time clock, thermostat, or environmental controller. When the device applies power to the “trigger cable”, the relay in the HPR-1 applies power to the connected equipment. The HPR-1 is rated at 30 amps @ 240 volts. 3 year warranty.
240 volt power to the input side of the HPR-1. The air conditioner or ballasts to be controlled are then hard-wired into the output side of the relay. The 16 foot trigger cable coming from the HPR-1 is then connected to your control device such as a time clock, thermostat, or environmental controller. When the device applies power to the “trigger cable”, the relay in the HPR-1 applies power to the connected equipment. The HPR-1 is rated at 30 amps @ 240 volts. 3 year warranty.
50’ 14 Gauge Extension NextGen only
Our extension lamp cords enable the user to increase the distance from their ballast to their reflector. They are available in 10’ and 50’ lengths. Please note that 50’ lamp cord extensions can only be used with the NextGen Electronic Ballasts.
50’ 3 Outlet Power Block
Our Power Cords feature a 3 outlet plug block, saving the cost and clutter of running two or three cords for gardening appliances. The cords are rated for up to 15 amps for the 25’ and 50’ cords and 13 amps for the 100’ cord.
5kv Mogul Socket
The C.A.P. Mogul Socket is a 5kv socket that will fit any Mogul bulb. Comes with 2 lead wires.
6 Outlet Power Tap
Plugs into a standard wall outlet, giving you 6 outlets. Has a screw that attaches it firmly to the existing outlet, so there is no chance of it falling out. Great for indoor gardening where outlets are at a premium. Will handle up to 15 amps.
8’ Power Strip
This 8’ Power Strip will convert a standard wall outlet into six grounded outlets. It features a built-in circuit breaker to protect your electrical equipment. Will handle up to 15 amps.
Dryer Cord, 6’ 3 Cond. 30 amps
C.A.P. provides an alternative to hard wiring your MLC-4X & 8X. We offer 2 styles of dryer and range cords. Please use the 3 conductor style cords for electronic ballasts
Electrical Tap
Our heavy electrical taps allow you to connect a 1/0 - 4/0 wire to a 1/0 - 4/0 main line. This is used to run an electrical panel or lighting controller from an existing electrical line. They are fully insulated and can be used on live wires. You can put your wire on either side of the tap.
Intermatic 15 amp Grounded Timer (Case-12)
The Intermatic 15 amp timers are good for many different applications. They have 6 trippers that you can place for up to 3 on/off times per day. A manual override allows the user to turn these units on or off without changing the current timing. They have a 30 minute resolution. Rated for up to 15 amps. Great for lighting applications. Available in 2 versions, grounded and non-grounded.
Intermatic 240 volt 15 amp Timer (Case-12)
The Intermatic Heavy Duty HB-112 240 volt 15 amp timer is very good for lighting, air conditioning or other high amperage devices. It has 4 trippers that you can place for up to 2 on/off times per day and a manual override to allow you to turn it on or off without changing the current timing. It has a 30 minute resolution. This timer will control up to three 1000 watt lights. It has an industry standard NEMA 6-15 plug configuration.All of our 240 volt lighting have this plug available.
Intermatic Non-Grounded Timer (Case-12)
The Intermatic 15 amp timers are good for many different applications. They have 6 trippers that you can place for up to 3 on/off times per day. A manual override allows the user to turn these units on or off without changing the current timing. They have a 30 minute resolution. Rated for up to 15 amps. Great for lighting applications. Available in 2 versions, grounded and non-grounded.
Lid for 3½ & 5 Gal. Buckets
Our standard 3.5 and 5 gallon buckets have many different uses. You can use them to make an inexpensive water culture system. You can also use them for mixing and storing nutrient solution. An easy on and off lid is also available.
Light Hanging Kit
The Light Hanging Kit includes 2 “J” hooks, 2, 5’ lengths of chain, and 2 “S” hooks. Allows you to hang your light from the ceiling. Fully adjustable.
Night ON” Timer
The PTC series of photo controllers from C.A.P. are perfect when you need to turn something ON only during daylight hours or only at night. A photocell senses whether it is day or night, and turns the device plugged into it ON or OFF depending on which model you are using. The PTC-1 turns ON whatever is plugged into it during the “day” when the lights are on. The PTC-2 turns ON the device during the “night”, when the lights are off. PTC(s) are rated for 15 amps @ 120 volts. 3 year no hassle warranty.
Pair of Light Lifters
This unique reflector suspension system allows you to adjust the height of a reflector in one simple movement. The tension mechanism will keep the reflector in place once it is set at the desired height. The support strings pull out and retract like a yo-yo.Will work on light movers also! A simple way to raise a hood as plants grow! A pair will support reflectors up to 22 lbs. ((Reflector not included)
Power Module
The UPM-1 Universal Power Module is a unique device that can allow the user to run additional HID lights, control multiple fans/ air conditioners or other high amperage 120 volt equipment. The UPM-1’s plug-box is designed to be plugged into a standard household outlet. The 16 foot trigger cable coming from the UPM-1 is then connected to your control device such as a time clock, thermostat. or environmental controller. When the control device applies power to the trigger cable, the relay inside the UPM-1 applies power to the twin outlets on the front of the UPM-1 from the circuit that the UPM-1 is plugged into, not from the controlling devices power. The UPM-1 is rated at 15 amps @ 120 volts. 3 year no hassle warranty.
Receptacle w/12” lead, 14 gauge
Our lamp cord receptacles are available to mate with the popular C.A.P. lamp cord plug. They will also fit many other manufacturers lamp cords. They have 14 gauge wire leads, ½” strip and are available in either 12” or 24”.
Receptacle w/24” lead, 14 gauge
Our lamp cord receptacles are available to mate with the popular C.A.P. lamp cord plug. They will also fit many other manufacturers lamp cords. They have 14 gauge wire leads, ½” strip and are available in either 12” or 24”.
Socket Assembly w/Pigtail Strain Relief
The C.A.P. 5kv Mogul Socket Assembly comes ready to wire! Just connect your wires, and you’re good to go. Comes with a strain relief to hold your cord firmly.
w/ 15’ Lamp Cord 16 ga
The C.A.P. 5kv Mogul Socket with lamp cord fits all C.A.P. and many other manufacturers lamp cord receptacles. Please note that the 65’ cord will only work with NextGen Electronic Ballasts.
w/ 15’ Lamp Cord 16 ga
The C.A.P. 5kv Mogul Socket Assembly with lamp cord fits all C.A.P. and many other manufacturers lamp cord receptacles. Please note that the 65’ cord will only work with NextGen Electronic Ballasts.
w/ 20’ 120 volt 18 ga
The C.A.P. Mogul Socket Assembly with 120 volt power cord comes with a wire hanger and is perfect for hanging your compact fluorescent bulb.
w/ 20’ 120 volt18 ga
The C.A.P. Mogul Socket with 120 volt power cord is perfect for hanging your compact fluorescent bulb.
w/ 25’ Lamp Cord 14 ga
The C.A.P. 5kv Mogul Socket with lamp cord fits all C.A.P. and many other manufacturers lamp cord receptacles. Please note that the 65’ cord will only work with NextGen Electronic Ballasts.
w/ 25’ Lamp Cord 14 ga
The C.A.P. 5kv Mogul Socket Assembly with lamp cord fits all C.A.P. and many other manufacturers lamp cord receptacles. Please note that the 65’ cord will only work with NextGen Electronic Ballasts.
w/ 65’ Lamp Cord 14 ga. (NextGen Only)
The C.A.P. 5kv Mogul Socket with lamp cord fits all C.A.P. and many other manufacturers lamp cord receptacles. Please note that the 65’ cord will only work with NextGen Electronic Ballasts.
w/ 65’ Lamp Cord 14 ga. (NextGen Only)
The C.A.P. 5kv Mogul Socket Assembly with lamp cord fits all C.A.P. and many other manufacturers lamp cord receptacles. Please note that the 65’ cord will only work with NextGen Electronic Ballasts.
w/ 8’ 120 volt 18 ga
The C.A.P. Mogul Socket with 120 volt power cord is perfect for hanging your compact fluorescent bulb.
w/ 8’ 120 volt 18 ga
The C.A.P. Mogul Socket Assembly with 120 volt power cord comes with a wire hanger and is perfect for hanging your compact fluorescent bulb.
Weekly Digital Timer 120v (Case-8)
The ValuLine Weekly Digital Timer from C.A.P. will time up to 8 on/off settings per day and is accurate to the minute. The timer has a digital clock and LCD readout. The unit has a minimum
on time of 1 minute and a maximum off time of 7 days. Has 2 timed receptacles and a convenient on/off indicator light. The unit is grounded and rated for 15 amps at 120 volts. Comes with a
rechargeable Ni-MH Battery.
on time of 1 minute and a maximum off time of 7 days. Has 2 timed receptacles and a convenient on/off indicator light. The unit is grounded and rated for 15 amps at 120 volts. Comes with a
rechargeable Ni-MH Battery.
